LIP-8012E & LIP-8024E Gigabit Phone
User Guide
21
3.4
Differential Ring Signals
When multiple phones in a small area ring, it can be
difficult to tell which are ringing. The iPECS Phone has
14
Ring Tones
available for differentiating one phone’s
ringing from another. Four of the tones are stored in the
phone permanent memory; the remaining ten tones are
in the system memory. Four of these ten can be
downloaded into the phone memory for use as the 5
th
to
8
th
Ring Tone
.
In iPECS-MG
To download a Ring Tone from System memory:
•
Press
TRANS
/
PGM
,
•
Dial 2 for Ring Tones,
•
Dial 3 for Ring Tone download,
•
Dial the phone’s memory location to receive the tone (5-8),
•
Dial 0-9 for the desired tone number; a confirmation tone is heard,
•
Press
HOLD
/
SAVE
to download.
To select a Ring Tone from phone memory:
•
Press the
TRANS
/
PGM
button,
•
Dial 2 for Ring Tones,
•
Dial 1 or 2 for Internal or External ring,
•
Dial 1 for Keyset Ring Source,
•
Dial 1-8 for the desired tone number; a confirmation tone is heard,
•
Press
HOLD
/
SAVE
to make the selection.
In iPECS-LIK
To download a Ring Tone from System memory:
•
Press
TRANS
/
PGM
,
•
Dial 1 for Ring Tones,
•
Dial 5 for Ring Tone download,
•
Dial the phone’s memory location to receive the tone (5-8),
•
Dial 0-9 for the desired tone number; a confirmation tone is heard,
•
Press
HOLD
/
SAVE
to download.
To select a Ring Tone from phone memory:
•
Press the
TRANS
/
PGM
button,
•
Dial 1 for Ring Tones,
•
Dial 1 or 2 for Internal or External ring,
•
Dial 1-8 for the desired tone number; a confirmation tone is heard,
•
Press
HOLD
/
SAVE
to make the selection.
