Ericsson iPECS-100, Feature Description And Operation Manual

Page: 74 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
54
2.16 AUTO CALL RECORDING
Description
iPECS Phone users can be configured in the system to record all calls to a mailbox or the hard
disk drive of an iPECS Phontage or UCS Client. When recorded to a mailbox, users manage
the recording through voice mail. For recordings to the Phontage or UCS Client, recordings are
managed directly by Phontage or UCS Client with the ability to listen to, delete or send the
recording to others via e-mail.
Operation
Recording of calls is automatic when assigned.
To manage the recordings, use the procedures outlined in the Phontage or UCS Client User
Guide.
Conditions
1. The Phontage or UCS Client can record one call at a time and must be idle. While
recording, if the Phontage or UCS Client places or receives a call, recording
terminates.
2. When call recording begins, the station will receive a Call Recording confirmation
tone.
3. A remote Phontage or UCS Client will not support call recording.
4. If user want to record in case of CO call, he can set CO in PGM 112-Btn 20. If he
set ALL, all calls can be recorded.
Programming
STATION
1 Two-way Record Privilege (PGM 112-Btn11)
2 Auto Call Recording (PGM 112-Btn 20)
3 Call Recording Destination (PGM 112-Btn 21)
Related Features
Hardware

iPECS Phone, PC with Phontage or UCS Client