Ericsson iPECS-100 Feature Description And Operation Manual Download Page 452

Page: 452 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

407

8.15 DSS/BLF (BUSY LAMP FIELD)

Description

BLF feature is supported with LG SIP Phone (SIP-88xx).

Operation

To set DSS/BLF feature in SIP-88xx

1. Enter the SIP-88xx Web administration.

2. Enter the Button Assignment menu.

3. Select DSS/BLF and set the BLF number.

4. Press

[CHANGE]

button.

To call directly using DSS/BLF button

1. Press the

[DSS/BLF(1003)]

button that you call to directly.

2. The LED of button(1003) will blink.

3. If station 1003 answers the call, the LED of DSS/BLF will be on.

To pick up call for DSS/BLF button

1. The LED of DSS/BLF(1003) will blink while station 1003 is receiving call.

2. By pressing

[DSS/BLF

(1003)

]

, call will be picked up.

Conditions

1. DSS/BLF can just show 3 status

– Idle(LED “off”), Ringing(LED “blink”) and

Busy(LED

“on”).

2. It just show the status related with call

– For DND and other features the LED will be

off.

Programming

Related Features

Hardware



None

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands