Ericsson iPECS-100, Feature Description And Operation Manual

Page: 338 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
300
Hardware

ISDN line

iPECS Phone
4.16.2 ISDN Malicious Call Id Request
Description
When the ISDN supports the Malicious Caller Id supplementary service, iPECS can request the
CLID from the ISDN. The CLID is saved and output in the SMDR call record. Malicious Caller Id
is activated during an ISDN call and requires a
{MCID REQUEST} Flex button to access the
feature.
Operation
iPECS Phone
To program an {MCID REQUEST} button;
1. [PGM] + {FLEX} +
“*0” +
[SAVE]
To request MCID, while on an incoming ISDN call
1. Press the {MCID REQUEST} button.
Conditions
1. The ISDN must support the Malicious Caller Id Supplementary Service as defined
by the EN300-130 standard protocol.
2. If the MCID request is successful, the SMDR call record will include the CLID
returned from the ISDN and the characters
“MT”. If the request fails, the characters
“MF” are included in the record.
3. If the system is programmed to save SMDR records, the MCID is stored in the
system memory as part of the call record.
Programming
CO/IP 1 MCID Request Code (PGM 109-Btn 1)
SYSTEM 1 SMDR Save (PGM 177-Btn 1)
Related Features

ISDN Supplementary Services
Hardware

ISDN line

iPECS Phone