Ericsson iPECS-100, Feature Description And Operation Manual

Page: 289 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
252
3.2 INTERCOM CALL (ICM CALL)
Description
A non-blocking ICM is available to all stations in the system. Users may place an intercom call
to other stations in the system by dialing applicable digits as defined in the system
’s Numbering
Plan.
Operation
iPECS Phone
To place an intercom call
1. Lift the handset or press the [SPEAKER] button to receive ICM dial tone.
2. Dial station number or press {DSS/BLF} button.
3. For ring-back tone, await answer or For Intercom splash-tone, speak and await
answer.
SLT
To place an intercom call
1. Lift the handset to receive ICM dial tone.
2. Dial station number.
3. For ring-back tone, await answer or,
For Intercom splash-tone, speak and await answer.
Conditions
1. Intercom dial tone will time-out if action is not taken within Dial-Tone Time or if the
time between digits exceeds the Inter-digit Timer. Error tone is received should a
time-out occur.
2. ICM Dial tone is removed after dialing the first digit.
3. If the called station is busy, Intercom Busy tone is provided for the Busy Tone time
(7 seconds) then, error tone is sent by the system. The caller may disconnect or
activate a feature such as Message Wait/Callback prior to the time-out.
4. For iPECS Phone users, consecutive Intercom calls can be placed without the need
to regain ICM dial tone (no need to hang-up) between calls; the user simply
presses another
{DSS/BLF} button.
5. An Intercom call to a station in the HF answerback or Voice Announce mode (H or
P Intercom Signaling Mode) is not considered answered unless the called user lifts
the handset or presses the
[SPEAKER] button (goes off-hook).
Programming
STATION 1 Prime Line (PGM 113-Btn 7)
SYSTEM 1 ICM Dial Tone Timer (PGM 181-Btn 6)
2 Inter Digit Timer (PGM 181-Btn 7)