Ericsson iPECS-100 Feature Description And Operation Manual Download Page 288

Page: 288 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

251

3. INTERCOM

3.1 DIRECT STATION SELECT/BUSY LAMP FIELD

(DSS/BLF)

Description

When a Flex button on an iPECS Phone or DSS Console is assigned as a

{DSS}

button, it also

serves as a Busy Lamp Field. The LED indicates the status of the associated station or system
facility.

Operation

iPECS Phone

Operation of this feature is automatic for assigned Flex buttons.

Conditions

1. A station receiving ICM ringing is considered busy and the associated station LED

on all other stations will flash at 30 ipm.

2. A station receiving ICM ringing will receive visual indication by a flashing LED of the

Flex button associated with the calling station.

3. When a station receives a Camp-On the LED of a DSS button associated with the

calling station will flash.

4. The station is considered busy when:



in use,



receiving ICM Ring at an iPECS Phone,



receiving any ring at an SLT.

Programming

Related Features



Intercom Call (ICM Call)



Station User Programming & Codes

Hardware

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands