Ericsson iPECS-100 Feature Description And Operation Manual Download Page 274

Page: 274 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

239

2.81 REMOTE CONTROL WITH MOBILE EXTENSION

Description

Mobile extension user can change the mobile extension settings remotely.

Operation

1. The mobile extension user dials his DID number with mobile phone. Then the

system will check the CLID, answer the call and the user will receive internal dial
tone.

2. He can enter the

“remote control menu” with the code (remote MEX control code :

PGM109-Flex16) and then confirmation tone will be provided.

3. He can select the desirable menu.

4. He hears the dial tone. (Step 2)

Remote control menu

– 1: Activate Mobile extension

– 2: Deactivate Mobile extension

– 3: Fwd to VSF/VM group

– 4: Cancel Fwd to VSF/VM group

– 5: ACD Agent Duty OFF

– 6: ACD Agent Duty ON

– 7: Callback to Mobile extension

Conditions

1. In menu 1(Activate Mobile extension), PGM Authority(PGM236-F1) should Enable

2. In menu 3(Fwd to VSF/VM group),

VSF/VM hunt group(PGM190) should be existed.

Call fwd admin (PGM111-F2) should be ON.

VSF Access admin(PGM113-F2) should be Enable

3. In menu 5(ACD Agent Duty OFF), the reason of Duty OFF is 1.

4. Remote MEX Control code(PGM109-F16) should not be started with

“#”.

5. If mobile extension user dial

‘7’ in menu, the call will be disconnected after the

confirmation tone and call back will be placed to mobile extension.

6. If mobile extension user want to hear help announce for remote control, you can set

Announce in ADM 236.

Programming

NUMBERING PLAN

Announce

1 Remote MEX Control (PGM109-Btn 16)

2 Announce (PGM 236-B13)

Related Features

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands