Ericsson iPECS-100, Feature Description And Operation Manual

Page: 249 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
218
Operation Procedure
1. When user dials the digit for VMIB greeting recording in CCR menu or Flexible DID
Table menu, system prompts
“enter password” prompt.
2. User enters system main attendant
’s telephone number, password.
3. If there are two or more over VMIM boards,
“Enter slot number” is played
4. User enters 3 digits of VMIM board slot number.
5.
“Enter system greeting number” is played.
6. User enters 3 digits system greeting number 001 ~ 072.
7.
“Enter language type 1 – 6” is played.
8.
“To record a new greeting, press pound” is played. And then if there is a recorded
greeting, the greeting is played.
9. User dials
‘#’.
10.
“Start recording after the tone. When you are finished, press pound” is played and
confirm tone is heard.
11. User records the greeting and dials
‘#’ to finish.
12. System goes to step 5 above. So,
“Enter system greeting number” is played.
13. User can hang up.
Conditions
Programming

A new CCR digit in PGM 228 entry will be added. This value will be 14. It
can be assigned to any DTMF digit in a CCR menu.

A new Flexible DID Table in PGM 231 entry will be added. This value will be
15.
Related Features
Hardware
2.73.7 Administrator Mailbox
Description
This feature provides a mailbox that has administrative interface via telephone commands to
perform common tasks associated with the VM. In addition, administrator mailboxes may be
used to record a broadcast message which is delivered to all mailboxes in a same tenancy
group.
Operation
Stations programming will have a field to mark the mailbox with administrative options.
If a mailbox is marked as an administrator, the main prompt will offer
“to access administrative
options, press six
”
Main Menu