Ericsson iPECS-100, Feature Description And Operation Manual

Page: 235 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
206
2. The conditions associated with DISA apply.
3. In Admin, VSF is used as the single reference for a parameter that applies to both
the VSF and the VMIM.
Programming
Related Features

Message Retrieval Options

VMIM/VSF-Auto Attendant

Message Retrieval
Hardware

VSF and/or VMIM
2.73.3.4 Message Retrieval Options
Description
The user may dial the digit 9 to receive the
“VM long Options” prompt while in the Voice
Mailbox, including during or after a voice message or system prompt except when an option
has been selected that requires user dialing. The later may occur when the user selects
Message Retrieval Option 1/2 (Play New/Saved Message), 7 (Cancel or Forward message, for
Remote Access Only) or 8 (Mail Box settings). The
“VM long Options” prompt is:
"To play new messages, press one, to play saved messages, press two, to set station
forwarding, press seven (This option is available only for remote access), to set greeting or
password, press eight, to disconnect, press pound, Press 0 for the operator, Press nine to hear
this message again."
The VMIM/VSF Voice Mail will respond to incoming digits as shown in the following table.
Digit Function
1 Play New Msg
2 Play Saved Msg
7 Set Cancel/Fwd, available only for remote access
8 Mailbox Setting, "Mailbox Settings" prompt
9 VM Long options
# Drop, "Goodby
e”
10 Attd Call, Call to System Attendant.
Operation
iPECS Phone
To access a Message Retrieval option
1. At any time after the
“Number of Messages” prompt, dial a Message Retrieval
Option digit. The system initiates the selection providing any needed prompts.