Ericsson iPECS-100, Feature Description And Operation Manual

Page: 22 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
8
2.3 AUTHORIZATION CODES (PASSWORD)
Description
Authorization Codes provide a means to control access to Off Premise Call Forward, Walking
COS, or DISA and may be required for outgoing CO/IP Line or LCR access based on
configuration of the iPECS database. When users dial an Authorization Code that matches an
Authorization Code stored in the database, the system invokes the Station COS or the COS
assigned to Authorization code. Each Authorization code has separate Day/Night mode COS
assignments.
There are two types of Authorization Codes, Station and System. A Station Authorization Code
is specifically related to a given station and intended for a single user. The System
Authorization Codes are intended for use by any station in the system.
The Station Authorization Codes includes the associated station number and the assigned
code. The structure of the System Authorization code can be set as either
“*”, or “*” the
Authorization table index and the code digits. The later allows duplicate codes to be employed
using entry of table index to provide a unique identification of the entry.
The Administrator and Attendants are permitted to assign any Authorization code including
codes for another station. Normal users may only assign the Station Authorization code for the
specific station.
Operation
iPECS Phone
To assign a Station Authorization Code:
1. Press the [PGM] button.
2. Dial
“33”, the Authorization Code Program Code.
3. Dial the Station number.
4. Dial the Authorization Code (1 to 12 digits).
5. Press the [SAVE] button.
To enter an Authorization Code when second dial tone is received:
1. Dial the station number for the Station Authorization code or, for a System
Authorization Code, dial
“*” or “*” and the Authorization table index.
2. Dial the corresponding Authorization Code.
3. Place call as normal.
SLT
To assign a Station Authorization code:
1. Lift the handset.
2. Dial SLT Program Mode Entry code
“561”.
3. Dial Station User Program code
“33”.
4. Dial Authorization Code (1 to 12 digits).
5. Momentarily press the Hook-switch, receive confirmation tone.
To enter an Authorization Code when second dial tone is received;
1. Dial the station number for the Station Authorization code or, for a System