Ericsson iPECS-100, Feature Description And Operation Manual

Page: 130 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
110
2.41 HEADSET COMPATIBILITY
Description
An industry standard headset can be connected to an iPECS Phone in place of or in addition to
the handset. The station is then programmed for Headset operation.
In the Headset mode, pressing the [SPEAKER] button will send audio to the Headset instead
of the speakerphone. In addition, when in the Headset mode, ring signals can be delivered to
the speaker or the headset as defined in the system database.
iPECS Phone users may assign a Flex button to select Headset or Speakerphone operation.
The
{HEADSET SELECT} button may be used to toggle the operation of the phone between
Headset and Speakerphone.
Operation
iPECS Phone
To assign a Flex button for {HEADSET SELECT}
1. [PGM] + {FLEX} + [PGM] +
“61” +
[SAVE]
To change operation from Speakerphone to Headset
1. Press the [PGM] button.
2. Dial
“61”, the Headset select code.
3. Dial
“0” to select Headset, “1” to select Speakerphone.
Or,
1. Press {HEADSET SELECT} button.
To change the device to receive ring signals
1. Press the [PGM] button.
2. Dial
“62”, the Ring select code.
3. Dial
“1” for Speaker, “2” for Headset or “3” for both.
To place/answer calls using the headset
1. Press the [SPEAKER] button with the phone in Headset mode.
Conditions
1. The Intercom Signaling Mode can be set in the Headset mode as with the
Speakerphone mode.
2. The station always receives Page announcements over the speaker of the iPECS
Phone.
3. Although the phone is in the headset mode, the system will monitor the hook-switch
status. If the user lifts the handset to go off-hook, audio is delivered to the handset.
4. When a LIP-8012D/8024D/8040L with headset mode is talking, {SPEAKER} soft
button is available. If the user press {SPEAKER} soft button, the user can talk with
speaker/microphone, temporarily(temporary speaker mode). In temporary speaker
mode, if the user presses [Trans] button or [Hold] button or etc, temporary speaker
mode will end.