Ericsson iPECS-100, Feature Description And Operation Manual

Page: 116 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
96
2.34 DOOR OPEN
Description
The iPECS hardware is equipped with relays that activate External Control Contacts. The
contacts can be assigned to one of several functions including a Door Open Contact. When
used as a Door Open Contact, the contact is connected to a door-lock release mechanism.
When assigned stations receive the Door Bell signal, the user may dial the Door Open code to
activate the contact.
iPECS Phone users may assign a Flex button as a {DOOR OPEN} button.
Operation
iPECS Phone
To assign a {DOOR OPEN} button
1. [PGM] + {FLEX} + Door Open code
(“#*1”, “#*2”, “#*3” or “#*4”) +
[SAVE]
To activate the relay contact
1. Lift handset or press [SPEAKER] button.
2. Dial Door Open code,
“#*1”, “#*2”, “#*3” or “#*4”.
3. Hang-up to return to idle.
Or,
1. Lift handset or press [SPEAKER] .
2. Press the {DOOR OPEN} button.
3. Hang-up to return to idle.
Conditions
1. The number of relay contacts available varies based on the system size. Refer to
Table 1.2-1 for the number of available contacts.
2. The Door Open feature dial code is based on the assigned External Contact as
below:
External Contact 1 =
“#*1”
External Contact 2 =
“#*2”
External Contact 3 =
“#*3”
External Contact 4 =
“#*4”
3. The contacts are rated at 1 amp, 24 VDC.
4. A station will receive error tone if not allowed access to Door Open.(PGM 113-Btn
25)
Programming
SYSTEM 1 External Contact Control (PGM 168)
2 Door Open Timer (PGM 181-Btn 5)
STATION 1 Door Open (PGM 113-BTN 25)