Bridging
3.4.5.4.12 vlan
(VLAN-Aware)
Description
This command is used to assign one or several VLANs to the
virtual port in a VLAN aware bridge.
Syntax
[no] vlan first_vlan_id [last_vlan_id]
first_vlan_id
The first VLAN number in the range 1 – 4095.
last_vlan_id
The last VLAN number in the range 1 – 4095.
no vlan first_vlan_id [last_vlan_id]
Removes VLAN
assignment
Default
None
Modes
Bridge Virtual Port configuration
Example
To assign VLAN 3:
EXN400(config-bridge-port)# vlan 3
3.4.5.4.13
txweight (VLAN-Aware, VLAN Priority Mapping, Fast Ethernet)
Description
This command is reserved for at Fast Ethernet interface
bound to a ALAN-aware bridge and configured to support VLAN priority
mapping. It is used to configure the transmit weight for a priority level.
Syntax
txweight level weight
level
The priority level in range [0-N] where N is the
maximum number of priority levels minus 1
(priority table size).
weight
The transmit weight in range [1-100].
Default
Weight is 1 for all levels.
Modes
Bridge Virtual Port configuration
Example
To set weight 19 to priority level 1:
EXN400(config-bridge-port)# txweight 1 10
3.4.5.4.14 show
Description
This command displays the current configuration of the
virtual port under configuration. It can also display the list of MAC
addresses that were dynamically learned on this virtual port.
Syntax
show [macs]
show
Displays
configuration
124
1553-LZY 214 2655 C 2004-11-24
