Bridging
Example
To disable learning:
EXN400(config-bridge)# no learning
3.4.5.3.5 subscriber-policy
Description
This command is used to bind a bridge to a subscriber
policy. When a bridge is first created, it is automatically bound to the
default
subscriber-policy but this can be changed by using this
command.
Syntax
subscriber-policy policyName
policyName
The name of an existing subscriber policy.
no subscriber-policy policyName
Removes binding and restores binding on the
default
policy
Default
default
policy
Modes
Bridge configuration
Example
To bind the bridge to the subscriber policy named
subsc
:
EXN400(config-bridge)# subscriber-policy
subsc
3.4.5.3.6 management-entity
Description
This command is used to bind the bridge to management.
The management entry point must be defined first. By doing this way
instead of binding one interface to management, no interface is dedicated
to management but management can be achieved through any interface
that is bound to the bridge.
Syntax
management-entity management-name
management_name
Specifies the name of the management system.
no management-entity management-name
Unbinds the bridge from management-name
management entity.
Default
No management
Modes
Interface configuration, Interface-ATM-VC configuration,
Bridge configuration
Example
To bind the bridge to the management entity named
mn
:
1553-LZY 214 2655 C 2004-11-24
115