Bridging
3.4.4.3 Commands
3.4.4.3.1 prio-table
Description
This command is used to assign a priority table to the group.
This defines the maximum number of PVC ranges that can belong to the
group. When a PVC range group is first created, it is automatically
assigned the default priority table.
Syntax
prio-table tableName
tableName
The name of the priority table. It can be up to 15
alphanumeric characters long.
Default
default
priority table
Modes
ATM PVC group configuration, ATM PVC range group
configuration
Example
To assign priority table named prioatm to the PVC range
group:
EXN400(config-if-atm-group-range)# prio-table
prioatm
3.4.4.3.2 level
range
Description
This command is used to add a PVC range in the group and
assign a priority level to it. The PVC range must be defined first.
Syntax
[no] level levelNum range rangeName
levelNum
The priority level in range [0-N] where N is the size
of the priority table minus 1.
rangeName
The name of the PVC range. It can be up to 8
alphanumeric characters.
no level levelNum range rangeName
Removes the PVC range from the group.
Default
None
Modes
ATM PVC range group configuration
Example
To assign PVC range named rgv:
EXN400(config-if-atm-group-range)# level 0
range rgv
110
1553-LZY 214 2655 C 2004-11-24
