Bridging
3.4.1.3.9 show
(local)
Description
This command displays the current status of the policy under
configuration.
Syntax
show
Default
None
Modes
Subscriber policy configuration
Example
To display current configuration:
EXN400(config-subscr)# show
3.4.1.3.10 show
(general)
Description
From any mode, user can display the list of subscriber
policies or the current configuration of a specific policy.
Syntax
show subscriber-policy [name]
name
Specifies the name of the subscriber policy.
Default
None
Modes
All
Example
To display configuration of subscriber policy named subsc:
EXN400(...)# show subscriber-policy subsc
3.4.1.4
Removing a Subscriber Policy
From the Global Configuration mode, enter the following command:
no subscriber-policy policy_name
policy_name
The name of the subscriber policy to remove.
The subscriber policy
default
cannot be removed.
Removing a subscriber policy that is used by one or more bridges
automatically updates these bridges and binds them to the subscriber
policy
default
.
1553-LZY 214 2655 C 2004-11-24
101
