on line two. The radio can be programmed to ring when an individual call is
received. If enabled, the ring begins five seconds after the caller unkeys and
will continue until the PTT button, the
c
button, or
i
is pressed.
If a response is made to the call prior to the programmed call-back time-out,
the call will automatically be directed to the originating unit. If a response is
not made before the call-back time-out, the radio will return to normal re-
ceive mode, but
* WHC *
will be displayed. If the caller’s ID is not received,
UNKNOWN
will display for the duration of the call and there will be no
call-back hangtime.
To respond after the call-back time-out, press the
i key. The radio’s dis-
play will show the callers ID on the first line and
WHCI=1
on the second
line. Pressing the PTT button at this point will initiate an individual call back
to the original caller. (If the last call was a group call, the display will show
WHCG=1
. Pressing the PTT button will place the call as an individual call.)
The radio stores the ID’s of the last 10 callers in the Calls Received List as
shown. Individual calls are stored in the top half of the list (1-10) and group
calls are stored in the bottom half of the list (1-10). The most recent call is
stored in position 1, the second most recent call is stored in position 2, etc.
To access the list, press the
i
key twice. Use the
,
or
.
keys to scroll
through the list. Pressing the
m
key will display the time elapsed since the
call was received.
Hookswitch functions the same as
c
key in I-CALL, phone call,
and menu modes.
NOTE
42