ity Group Scan capability which operates similar to priority scan in Conven-
tional mode.
The following is a description of PC-Programmable scan features that
should be helpful in understanding the Group Scan Operation of the radio:
Scan Hang Time - the delay time the radio waits before resuming scan after
the push-to-talk is released or after the carrier has dropped a channel.
TX Select - the group the radio will transmit on while scanning. The radio is
programmed to transmit on either the scanned group or the selected group.
Scan List (privileges) - this feature allows or prohibits scan list changes by
the user.
P1 Programming - priority group programming is accomplished by one
(and only one) of three methods:
1.
From the keypad, where the Priority programming is not fixed and
does not follow the selected channel.
2.
Priority 1 group programming follows the selected channel.
3.
Priority 1 group programming is fixed during PC Programming and
cannot be changed by the user.
P1 Always Scan - determines if the Priority 1 Group will always be
scanned, regardless of the scan state set by the user.
Adding Groups To A Scan List
1. With scan operation turned off, select the desired group to add to the se-
lected Trunked system group scan list.
2. Press
< or > on the SCAN add/delete control. The current priority
status of the group will be displayed in column 1 of line one for a time-
out period. If the group is not part of the scan list the status will be
blank.
3. While the status is displayed press
< to add the group to the scan list.
"S" is displayed on line one.
4. Press
< a second time to set the group to Priority 2. A "2" is dis-
played on line one.
39