Ericsson EDACS IPE-200, User Manual, Page: 42 / 56

(10) KEY BURST, TONES, OR CLICKS: Lets you select
whether keypad numeric keys (0-9, #, *) produce DTMF
tones or key clicks.
Default: KEY CONT.
KEY BURST: Burst mode avoids double-digiting er-
ror. The radio signal may drop out very briefly when
you make a call in motion. This drop out can cause
equipment to interpret two or more digits when you
only press one. Select this mode if you experience a
double digit error often.
KEY CONT: Some answering machines require con-
tinuous mode. Select this mode if you are having
difficulty controlling answering machines.
KEY CLICK: Click mode sends the digits as a DTMF
click as opposed to a DTMF tone.
(11) BACKLIGHT SELECTOR: Keypad or display illu-
mination to be automatic or switched off.
Default: LIGHT AUTO.
LIGHT AUTO: The illumination comes on for ten
seconds after any key is pressed. The illumination
stays on continuously if the radio is mounted in a car
kit and turned on.
LIGHT OFF: The illumination is off at all times.
(12) BATTERY VOLTAGE: Shows the input battery volt-
age to the radio (for example, 6-3 = 6.3 volts).
(13) PERS PROG: PC personality programming mode.
42