Ericsson DT590 User Manual Download Page 114

Page: 114 / 164

More Features on your Extension

MD Evolution – Cordless DT590

114

Password Programming

You will be prompted to enter your user password when accessing

certain services, most particularly :
•

When placing a call in substitution or with signature from your

extension or a third party set.

•

When activating/deactivating a call forward from your extension

or a third party set (follow me service).

•

When consulting or personalizing your mailbox within your

facility's integrated voice mail system, when applicable.

By default, your user password is "1234". It is strongly

recommended that you change it to any other 4 digit code

including the * or # key - to ensure that use of the aforementioned

services is as secure as possible, and to preserve the confidentiality

of your mailbox, when applicable.
To do so, from your idle extension :

Dial the prefix "79" assigned to the user password

management service.

Next, enter your current user password.

Then, enter your new user password.

Press to confirm

Wait for the Service Acceptance Tone

Pr y

ÛwÛn(h)4(en)-d0.5(u)-142.3

Summary of Contents for DT590





































































































































































Search results

Summary of Contents for DT590

Reviews:

Ericsson DT590, User Manual, Page: 114 / 164

Search results

Summary of Contents for DT590

Reviews: