background image

24

Dialog 3213

Call Forwarding

Internal follow-me

All calls to your extension are diverted to an extension of your
choice (within the private network). During follow-me you will hear
a special dial tone and the diversion lamp indicates that your
triple access line has follow-me. You can still make calls as usual.

Note:

If your telephone is programmed with ”Multiple

Directory Diversion and Do not disturb” (ask your system
administrator), Internal follow-me is ordered and 
cancelled simultaneously on all lines.

Order from your own extension

Lift the handset

Diversion

Press and dial the answering position number

Note:

Function key pre-programmed by system 

administrator.

Diversion

Press to order

Replace the handset

Note:

You can also use the procedure below.

* 2 1 *

Press and dial the answering position number

Note:

U.K.-press 

* 2 *

No.

#

Press

Cancel from your own extension

Diversion

Press

Notes:

- Function key pre-programmed by system administrator. 
- You can also use the procedure below.

# 2 1 #

Press

Note:

U.K.-press 

# 2 #

Summary of Contents for Dialog 3213





























































































Reviews: