Ericsson BusinessPhone 250, User Manual

Page: 60 / 120

Call Metering
BusinessPhone – Operator’s Console 60
Integrated system check
To avoid a loss of the counter values during reconfigurations of the
system, an integrated system check offers you the opportunity to
read out all the counters which were not reset before the
reconfiguration. To initiate the system check you need a special
class of service (please ask your system administrator if this feature
is available on your phone).
*45#
Dial
(Same procedure as used for reading out accumulated costs).
check
Press to initiate a system check (see display)
When a fault is found the following information will be shown:
display
Press to display the fault records (see display)
The display shows the first fault record in the system. The display
information includes the extension numbers which have been
deleted during the reconfiguration and the related costs for these
extensions.
next
Press to step through the faulty records (see display)
cost/pulse
Press to toggle between the indication in pulses or costs
(see display)
12 May 10:35 +15°^||
C= 0 I= 0 ||
||
OWN COSTS: 20 EUR
other check return
12 May 10:35 +15°^||
C= 0 I= 0 ||
||
CALLER RECORD FAULTY
display return
12 May 10:35 +15°^||
C= 0 I= 0 ||
||
202 EUR 50.00 COSTS
next cost/pulse reset return