Ericsson BS260 User Manual Download Page 60

Page: 60 / 127

Not

or Comm

l Use

ricsson Mobile

Com

unic

ons A

Personalizing the base station

Personalizing the base
station

If your handset is connected to the base station, you can change its settings by

using this handset. You may have to enter the base station PIN code to change

these settings. For the default base station PIN code, see page 78. To prevent

others changing the settings of the base station, you should change this code.

You can find out how to do this in “Changing the base station PIN code” on

page 76.

When you must enter the PIN code,

PIN:

is displayed:

•

Enter the base station PIN code using the number keys on the handset.

Connecting to other types of base stations

You can connect your handset to other types of base stations. Please refer to

the appropriate documentation.

The base station menus form a part of the handset menus. They are normally

in the same language as the handset menus. If the handset language is not

available, the base station chooses English by default. To select another

default language, use the

Language

option in the base station menus.

To change the base station’s default language:

Route:

BaseStation » Settings » Basic » Language

Select

Basic

and press

Y E S

PIN:

is displayed.

Enter the PIN code for the base station (see page 78) and press

Y E S

Select

Language

and press

Y E S

The current language is displayed.

Scroll through the list of languages until the language you want is selected.

Press

Y E S

to confirm your choice.

The base station language has now been changed.

CHANGING SETTINGS (PIN CODE)

LANGUAGE

Summary of Contents for BS260
































































































































Search results

Summary of Contents for BS260

Reviews:

Related manuals for BS260

Brands by name

Popular brands

Ericsson BS260, User Manual

Search results

Summary of Contents for BS260

Reviews:

Related manuals for BS260

Brands by name

Popular brands