31(42)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved
Kontr/Checked
Tillhör/Referens-File/Reference
1999-07-15
F
1545-ASB 150 02 Uen
FAULT TRACING DESCRIPTION
Faktaansvarig - Subject responsible
Completion of service
On completion of service disconnect RASC and check the warning log for entries. If this is the case
adopt the recommended measure(s). If no further measures can be taken note the logs (or printout if
possible) and contact your local support facility.
Remaining faults are to be reported (see point 4.9, “Fault reporting”.)
If you cannot fix the problem at the moment start up the exchange again and give the customer instruc-
tions how to cope with malfunctions, conclude by making a printout of the warning log and resetting it.
Disconnect RASC and place the cover on the exchange.
Dial tone present?
N
Y
Dial tone present?
Press the hook key on
the new portable
BC
Delete old portable
- Error in PBX
from system and
initialize new portable
with same PUN
- replace relevant IC-CU, IC-LU board
- re-initialize old portable with
original PUN.
Old portable defect
replace it
or not registered
N
Y
- extension number blocked
AA
AA
= Go to Completion of service below
From
page 29
AA
