INDIVIDUAL CALL - If an individual call
(a call directed to only one radio) is re-
ceived, the radio will unsquelch on the
assigned channel and the BSY status
flag will turn on. INDV, originators ID, or
the caller’s name (if programmed) is dis-
played and the MSG status flag flashes.
Adjust the volume as necessary.
Responding to an individual call prior to
the programmed call-back time-out will
automatically direct the transmission to
the originating unit on an individual ba-
sis.
The MSG status flag will remain flashing
even after the individual call time-out
period expires. Press the
P
key
(SPecial Call) to call the originating unit
back. The originator’s ID or name will be
displayed. Follow the procedures for
sending a special call.
ENCRYPTED MESSAGE - If the trans-
mission being received is an encrypted
transmission and the selected group is
programmed for private operation and
the correct cryptographic key is loaded
into the radio, then the receiver will un-
squelch, the PVT status flag will flash
and the private message will be heard in
the speaker. The radio automatically
switches between clear or private opera-
tion when it is receiving on a group or
channel programmed for private opera-
tion.
Sending A Message
1.
Turn the radio on, set the receive audio
level and select the desired system and
group.
2.
When private transmit mode is enabled,
the PVT status flag in the display will turn
on. Toggle transmit operation to private
or clear, as desired, by pressing and
releasing
@
and then pressing PVT
(shifted
P
).
3. Observe the display for the absence of
the BSY status flag to ensure no one is
transmitting on the selected group.
20