background image

ADD/DELETE KEY (Shifted SCAN Key)

When in trunked mode, pressing and releas-

ing 

 

@

 and then pressing A/D (shifted 

 

s

 key)

will add the selected group to the scan list if it is
not already on the list.  Repeating this sequence
will delete the group from the list.  When the
selected group is on the scan list, the S status flag
will show in the display.

Scan must be turned off before groups can be

added to or deleted from the scan list.  See 

 

s

s

KEY for details.

PRIVATE BUTTON (Shifted SPC Key)

Private transmit mode is enabled or disabled

by pressing and releasing 

 

@

 and then pressing

PVT (shifted 

 

P

 key).  When enabled, the PVT

status flag in the display will turn on.

If the radio is programmed for forced private

operation,  FRCD PVT will be displayed when

 

@

 PVT is pressed; private transmit mode is not

disabled.  If the selected group or channel is not
programmed for private operation, PVT DIS will
momentarily show in the display when 

 

@

 PVT

is pressed; the radio will not change to private
mode.  See PRIVATE COMMUNICATIONS for
additional details.

STORE KEY(Shifted)

 

1

 (shifted digit 1) allows ten (10) tele-

phone numbers and ten (10) radio ID numbers to
be stored and later recalled with the RCL button.

Store a telephone number by entering the

number (up to 29 digits) followed by an asterisk
(*). Next, enter the storage location (1-10) and
press and release 

 

@

 and then press 

 

1

.

STORED will be displayed for two seconds.

Store individual radio ID numbers by entering

the ID number (1 - 16382) followed by a pound
sign (#). Next enter the storage location (1-10)
and press and release 

 

@

 and then press 

 

1

.

STORED will be displayed for two seconds.

Do not use in Conventional mode.

NOTE

9

Summary of Contents for AEGIS EDACS M-PA Narrowband 9600













































Reviews: