Ericsson 230 Page 81 User Manual Download

Page: 81 / 107

Not

or Comm

l Use

ricsson Mobile

Com

unic

ons A

Using base stations

The handset can connect to several base stations. It can select a base station

automatically when it has been out of range or switched on. You can also

specify a base station to connect to.

Automatic selection

This menu option is only available if the subscription list contains base station

names.

To have automatic base station selection:

Route:

Networks » SelectNet

Choose

SelectNet

and press

Y E S

Automatic

or the currently selected base station is displayed.

If necessary use the

U P

D OW N

key to select

Automatic

Press

Y E S

to confirm.

The handset is set to automatic base station selection.

The handset tries to connect to a subscribed base station in the order of the pri-

oritized subscription list.

Manual selection

This menu option is only available if the subscription list contains base station

names.

To specify the base station to connect to:

Route:

Networks » SelectNet

Choose

SelectNet

and press

Y E S

Automatic

or the currently selected base station is displayed.

Press

U P

D OW N

to find the base station you want from the list.

Press

Y E S

to confirm.

The handset tries to connect to the selected base station.

Selection priority

The handset can select a base station automatically when it has been out of

range or switched on. In this case, it searches for the base stations in the order

of priority starting with the first one on the subscription list. If you wish to

change the order of your subscription list, the base station names can be re-

arranged using the

Priority

option.

This menu option is only available if the subscription list contains two or more

base station names.

SELECTING ANOTHER BASE STATION

Summary of Contents for 230












































































































Search results

Summary of Contents for 230

Reviews:

Related manuals for 230

Brands by name

Popular brands

Ericsson 230, User Manual

Search results

Summary of Contents for 230

Reviews:

Related manuals for 230

Brands by name

Popular brands