Ericsson 230 Page 13 User Manual Download

Page: 13 / 107

Not

or Comm

l Use

ricsson Mobile

Com

unic

ons A

Getting started

If the handset does not turn on automatically, remove the power adapter plug

from the wall socket and repeat from step 9. If that does not help, please refer

to “Subscribing handsets” on page 68.

When the battery is charged, the handset is ready for use. For more informa-

tion about charging the battery, please refer to “Battery” below.

Important

It is important to make a note of the IPEI code. You may need it to reset the

handset’s PIN code. Please refer to “Showing the IPEI code” on page 57 for

further details.

Note

We also recommend that you change the pin code of the base station

directly after installing the cordless phone. See “Changing the base station

PIN code” on page 56 for more information. See also “Overview PIN and

other codes” on page 58 for the PIN code of the handset and of the base

station.

Operating range

You can use your handset in the area that is covered by the base station. Out-

side this area, you lose contact with the base station and the signal strength

indicator on the display disappears. The warning light flashes and you hear

short, fast, warning beeps.

To make best use of the operating range, place your base station in a central

position.

The handset is powered by a rechargeable battery. You can fully charge a flat

battery by placing the handset in the base station for 3 hours. A fully charged

battery gives you up to 15 hours of calling time or up to 100 hours of standby

time. The handset has a battery meter, which indicates you how much power is

left in the battery.

Note

The handset is powered by a Nickel Metal Hydride (NiMH) battery. It

can be recharged at any time. To keep the battery fully charged, you can put or

leave the handset in the base station without any problem.

BATTERY

Summary of Contents for 230












































































































Search results

Summary of Contents for 230

Reviews:

Related manuals for 230

Brands by name

Popular brands

Ericsson 230, User Manual

Search results

Summary of Contents for 230

Reviews:

Related manuals for 230

Brands by name

Popular brands