TSGB16 & TSGB24
Field assembled
TSGB16ASY & TSGB24ASY
Pre-assembled
Separate
Assemble
Adjust to box
Bracket ready to attach to wall studs.
Use screw gun to assemble to stud.
Only one mounting screw required
at each end of bracket.
Attach electrical boxes.
*KEYHOLES ARE ON TSGB16 ONLY
WARNING:
ERICO products shall be installed and used only as indicated in ERICO product instruction sheets and training materials. Instruction
1.
sheets are available at
www.erico.com
and from your ERICO customer service representative.
ERICO products must never be used for a purpose other than the purpose for which they were designed or in a manner that
2.
exceeds specified load ratings.
All instructions must be
completely
followed to ensure proper and safe installation and performance.
3.
Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause
4.
product malfunction, property damage, serious bodily injury and death.
Products that are manufactured using spring steel components shall be used only in a non-corrosive indoor environment.
5.
All pipe supports, hangers, intermediate components and structural attachments must ONLY be used as described herein and are
6.
NEVER to be used for any other purpose.
NOTE: All load ratings are for static conditions and do not account for dynamic loading such as wind, water or seismic loads,
unless otherwise noted.
The customer is responsible for:
a. Conformance to all governing codes.
b. The integrity of structures to which the products are attached, including their capability of safely accepting the loads
imposed, as evaluated by a qualified engineer.
c. Using appropriate industry standard hardware as noted above.
SAFETY INSTRUCTIONS:
All governing codes and regulations and those required by the job site must be observed.
Always use appropriate safety equipment such as eye protection, hard hat, and gloves as
appropriate to the application.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
PART NO
DESCRIPTION
STUD SPACING
BOX DEPTH
TSGB 16*
ADJUSTABLE
11" TO 18"
1-1/2" OR 2-1/8"
TSGB16ASY*
ADJUSTABLE
PRE-ASSEMBLED
11" TO 18"
1-1/2" OR 2-1/8"
TSGB24*
ADJUSTABLE
17" TO 26"
1-1/2" OR 2-1/8"
TSGB24ASY*
ADJUSTABLE
PRE-ASSEMBLED
17" TO 26"
1-1/2" OR 2-1/8"
TECHNICAL SUPPORT:
www.erico.com
CFS300_D
INSTRUCTION SHEET
1 OF 2
© 2009 ERICO International Corporation