MIDI IMPLEMENTATION
The SYNTRX II has basic MIDI implementation – you can select a MIDI channel on
which the SYNTRX II receives MIDI note, note on (gate), pitch wheel, modulation
wheel (assigned to the VCF cutoff) messages, as well as two configurable CC
messages and a note velocity message that is assigned to the VCF cutoff. The
SYNTRX II receives only one MIDI note at a time, and it is higher note priority.
If no external CV is patched into the relevant inputs, MIDI note messages control
the pitch of the VCOs, if external CV is used, MIDI notes are added to the external
analogue CV, so you can use the MIDI keyboard or sequencer to transpose the
pitch of the VCOs.
MIDI CC messages are added to the joystick X and Y control voltages
correspondingly, so you can address them via same patch matrix connection
points as the joystick. MIDI CC message assignement is described in the
CONFIGURATION SETTINGS section on this manual.
You can send MIDI panic message by pushing and holding SHIFT button and
pushing REC/CLEAR button for 3 seconds.
24
Summary of Contents for SYNTRX II
Page 1: ...USER MANUAL...
