Ergotron Medical Grade Power Strip Assembly Instructions Manual Download Page 1

888-83-059-G-01 rev. D • 03/13

1 of 8

www.ergotron.com

1x

2x

2x

1x

3x

Ø

 ½

2

4

8 mm

8 mm

Ø

 1/4" (6.35 mm)

User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Nederlands
Benutzerhandbuch - Deutsch
Guida per l’utente - Italiano

ユーザーガイド

 : 

日本語

用户指南 :

 

汉语

사용자 안내서 :

 

대한민국

www.ergotron.com

1x

*To obtain 6' (183 cm) of usable length, pre stretch cord to 7' (213 cm). 
This may require up to 25 lbs (11.34 kg) of force.

M4 x 8mm

EN

See  Special 
Instructions 
on Page 4

ASSEMBLY INSTRUCTIONS

Mount Under 
Worksurface

Mount to Rear 
of Cart

Ergotron's Medical Grade Power Strip provides 
electrical AC power outlets for mobile point of care 
computing equipment in a healthcare environment.

Medical Grade Power Strip - 

Input: 120VAC/60 Hz; Output: 120VAC/60 Hz, 15 A maximum, total.

Ergotron's Medical Grade Power Strip includes 4 power outlets with individual protectors, power indicator light, 2 circuit breakers, a coiled cord with strain relief and storage hook, 
and a polarized connector designed for use in Hospital Grade Receptacles.
•  The Medical Grade Power Strip is certifi ed to UL 1363A.
•  The recommended storage temperature is 15°C (59°F).  The minimum storage temperature is -20°C (-4°F) and the maximum storage temperature is 60°C (104°F).
The recommended humidity range for storage is 0-95% rH. Refer to pages 6-7 for Maintenance and Safety information.

Operational

Storage

FCC Compliance Statement 

Ergotron's Medical Grade Power Strip

 has been tested and found to comply with the limits for a Class A digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own expense.

Changes or modifi cations not expressly approved by Ergotron, Inc. could void the user’s authority to operate the equipment.

Please contact Ergotron for complete EMC compatibility information.

Power "on"

Indicator Light

3' - 4' (91-122 cm) power cord*

Polarized

Connector

Outlet Protector

(individual flip-hatch for each outlet)

Circuit Breaker

Reset Button

-20 °C
-   4 °F

  50 °C
122 °F

Relative

Humidity 

Range

5-95% rH

60° C
140° F

10 °C
50 °F

  29 °C

 86 °F

Relative

Humidity 

Range

5-95% rH

40° C
104° F

Drill for Steel

Medical Grade Power Strip

Summary of Contents for Medical Grade Power Strip









Reviews: