Ergon Crafco SUPER SHOT 125, Parts Manual

Page: 114 / 176

Super Shot 125 DC 70CFM EU Part Manual
Chapter 8 Troubleshooting
©2022 by Crafco, Inc. All Rights Reserved
………………………………………………………...Troubleshooting (48300N) 8-38
8.7 Engine Diagnostic Trouble Codes (DTC)
How to use the Diagnostic Trouble Code Table
The engine supplied on the Super Shot 125 Diesel 100CFM Compressor machine is capable of
displaying Diagnostic Trouble Codes (DTC) on the engine control panel display. If your engine
displays a DTC, most likely you will have to contact your local engine repair center for service. To
locate your closest engine repair center, please go here:
https://www.yanmar.com/global/dealerlocator/ and locate your closest repair center. To use the table,
find the SPN and FMI # from the control panel screen, and match it to the first column in the table
listed as “SPN-FMI”. Please see the following figure below:
Engine DTC Table (48000N)
SPN-FMI Area Status
7F8A0-2 Crankshaft speed sensor
Error (abnormal signal)
7F8A0-5 Crankshaft speed sensor
Error (no-signal)
7F8A1-2 Camshaft speed sensor
Error (abnormal signal)
7F8A1-5 Camshaft speed sensor
Error (no-signal)
Active DTC 01/01
Check Engine
SPN FMI OC
7F8A0 05 001
WARM-UP . . . 25 s
New Active DTC
ENTER
O
A
I
OFF AUTO
RUN
Status
SPN #
FMI #
YOUR SPN-FMI # IS "7F8A0-5". FIND ON THE TABLE BELOW
7F8A0-5 = Crankshaft speed sensor; Error (no signal)
Fig. 8-12 Engine Control Display DTC
Table 8-30 Engine DTC Table PN 48000N