I
A
LS1512
Installation Instructions
Ergonomic solutions for office and light industrial work environments
©2016 Ergomart. All rights reserved.
www.ergomart.com | 888 420 3200
2
3
4
5
6
7
8
A
1
D
D
D
D
B
J
C
E
E
E
E
F
G
H
PAGE 1 OF 2
Please call Ergomart at
888 420 3200
with your questions
www.ergomart.com
Insert pole (K) into securely fastened
mount. Tighten set screw on mount with
3/32” Allen wrench (A) so that pole resists
spinning.
Attach VESA adapter to monitor using four
M4 x 12mm screws (E). Some monitors
may require a spacer kit. See page 2 for
details.
Turn screws on the bottom of arm
extensions to adjust rotational resistance
to the desired level.
Place cables into wire management clamps
under arms and use cable clip (I) to secure
cables to pole.
Insert tilter mechanism pin into end of arm.
Align dog washer(F) with bottom of tilter
mechanism pin and attach with flat head
screw (G).
Locate set screw on bottom of tilter
mechanism by tilting monitor upward.
Use 7/32 Allen wrench (H) to adjust rotation
resistance to desired level.
Slide collar and dual arm (J) onto pole and
tighten collar thumbscrew when adjusted
to desired height. Tighten dual arm set
screw with 3/32” Allen wrench until dual
arm has desired rotational resistance.
Attach the VESA adapter (C) to the tilter
mechanism (B) using four 10-32 x 3/8”
flat head screws (D).
