ergoline ergoselect 400, Operator'S Manual

Page: 15 / 56

- 15 -
P
reParInG the
P
atIent
Adjust the seat and the height of the load unit to positions
that allow the patient to reach the handgrips easily.
The height of the load unit is electrically adjustable. The
motor is operated via keys on the control terminal.
If the optional access ramp for wheelchairs is used, posi‑
tion the front wheels on the ramp and lock the wheelchair.
Check that all clamping levers are tightened.
w
heelchair locKs in the access raMp
Note
• Tighten the clamping levers only as far as necessary, NOT
with maximum force.
• Lubricate the clamping lever threads quarterly at minimum,
using a suitable lubricant (e.g. OKS470).
a
djusting the drive unit