ergoline ergoselect 4, Operator'S Manual

Page: 39 / 96

8 Control Terminal P
ergoselect 4 / 5 37
As soon as the ergometer receives commands from the
controlling ECG unit or PC, the exercise test will start and
the corresponding values will be displayed.
The exercise test can only be terminated with the corre-
sponding command from the controlling ECG unit.
120
Watt
15
min
76
/ min
138
/
96
mmHg
122
♥ / min
1 2 3 4 6 5 7
PC Mode
Figure 8 – 6: Exercise test screen 1
1
current load (watts)
2
most recent BP value (systolic/diastolic) or cuff pressure
during inflation and bar graph indicating microphone signal
strength (see below)
3
icon indicating wireless connection (Bluetooth or WLAN)
4
duration of exercise test (min)
5
heart rate measurement with the ergoline digital chest strap
6
heart rate at the time of the BP measurement (BPM)
7 pedal speed (RPM)
Note
• All functions are locked while the ergometer is
operating in PC mode, except for the saddle
height adjustment and the blood pressure key.
• To reactivate the saddle height adjustment function, press
and the arrow keys will be displayed again.
• Additional blood pressure measurements can be initiated
with .
2
159
mmHg
122
♥ / min
Figure 8 – 7: Exercise test screen 2
8.2.2 Ergometry
Use the softkeys on the right and left (
↑ ↓
) to position the
bar cursor on
Ergometry
and confirm the selection with
Select
.
PC Mode
Ergometry
Manual
Settings
Select
Figure 8 – 8: Main menu