ergoline ergoselect 4, Operator'S Manual

Page: 35 / 96

7 Control Terminal M
ergoselect 4 / 5 33
7 Control Terminal M
7.1 Turning the System On
You turn on the ergometer by pressing the power switch.
The ergometer runs a self-test. Subsequently, the start
screen displays.
Figure 7 – 1: Control terminal M
Note
• Instruct the patient not to pedal while the
ergometer is being turned on and during the
self­test.
• Apply the blood pressure cuff to the patient AFTER the
ergometer has been turned on and the self­test completed.
Control terminal M is entirely operated by remote control
(e.g., from an ECG recorder or a PC).
With this key you initiate a blood pressure measure-
ment. Pressing the key a second time during a measure-
ment will stop the measurement.
0
Watt
--
min
0
/ min
---
/
---
mmHg
0
♥ / min
Figure 7 – 2: Start screen
7.2 Operating Mode with Control Terminal M
Ergometers with control terminal M support the following
operating mode:
PC Mode
An external device (e.g. an ECG recorder, a PC-based ECG
system) controls the ergometer – no intervention at all is
required at the ergometer.