ergolet LunaIPx4, User Manual

Page: 23 / 24

23
9 EMC data
Note: EMC data only valid for Luna
IPx4
200 kg. (441 Ibs) 1 channel sold from 1/1-2020 and onwards.
Guidance and manufactures declaration for electromagnetic emissions
Emission standard Type Compliance to standard
CISPR 11 RF-emissions Yes, Group 1, Class B
EN/IEC6100-3-2 Harmonic emission Not applicable. Power < 75W
EN/IEC6100-3-3 Voltage
fluctuations/flicker
Yes
Guidance for application Environment
The LunaIPX4 is suitable for use in both professional as well as domestic environments including
environments where connected to the public low-voltage network.
Guidance and manufactures declaration for electromagnetic immunity
Emission standard Type Compliance level Specific guidance for
application environment
EN/IEC61000-4-2 Electrostatic discharge
(ESD)
± 8kV contact
Up to ± 15kV air
Suitable for use on wood,
concrete, or ceramic floor
materials. Keep relative
humidity below 30% when
used on floors of syntenic
materials e.g. carpets.
EN/IEC61000-4-4 Electrical fast transients
and bursts
± 2kV power-supply
± 1kV for signal lines
The LunaIPX4 is battery
powered during operation
and hence the internal
battery ensures operation
during mains voltage
disturbances.
The LunaIPX4 is suitable for
use with mains connected to
a power supply with the
quality of a public low-
voltage network supplying
domestic environment.
Portable and mobile radio
devices, including the wires,
should not be used closer to
the unit than the
recommended safe distance
or 30 cm, or calculated using
EN/IEC61000-4-5 Surge ± 1kV for signal lines
EN/IEC6100-4-11 Dips, interruptions and
variations on power
supply input
Angles: 0; 45; 90; 135;
180; 225; 270; 315
degrees
Cycles: Dips 0.5x,
Interruptions: 10x
Mains freq.
EN/IEC6100-4-8 Power frequency
magnetic field
30 A/m
50/60 Hz