Ergo LE55CU5030AK, User Manual

Page: 92 / 112

16
Press the POWER button on the remote control.
You can also use the Power button on the back of the TV.
*If there is no input signal within 15 minutes, TV will be
turned off automatically.
P.MODE S.MODE SLEEP
FREEZE CH.LIST AUTO ASPECT
-/--
Turning the TV On and Off
Install TV Channels Automatically
1.Press MENU on the Remote Control to display
the main Menu.
2.Press◄ or ►to locate the Channel Setting.Press
OK to enter sub menu.
3.Press▲ or ▼ to highlight scan item.
4.Press OK to enter Auto Scan sub menu.
5.Press MENU to return.
To select the TV or other external input sources connected to the TV.
1.Press the SOURCE button on the remote control.
2.Press ◄ or ► to select the required input source between DTV,DVB-S,HDMI,YPBPR,AV or
ATV.
����������������� OK button to enter.
7.Basic Operation of the TV
Selecting the Input Source
A
ATV
CAM Setting
Satellite Setup >
Signal Information >
Set CAM PIN Code >
CAM Setting
CAM Setting
Auto Scan >
Manual >
Set CAM PIN Code >