background image

Salina spindle bed

Thank you for purchasing this salina bed. Please read the instructions carefully before use to ensure safe 
and satisfactory operation of this product.

Pre-assembly preparation

Please ensure instructions are read in full before attempting to assemble this product

Necessary Tools

This item is

HEAVY

Please check the pack contents before attempting to assemble this product. A full checklist of components

is given in this leaflet. If any components are missing, please contact the retailer from whom you purchased

this product.

This product is 

HEAVY

, it should be assembled as near as possible to the point of use. 

TAKE CARE

WHEN LIFTING

to avoid personal injury and (or) damage to the product. 

This product takes approximately 

40 MINUTES

to assemble with 

2 PEOPLE

.

The fittings pack contains 

SMALL ITEMS

which should be

KEPT AWAY FROM YOUNG 

CHILDREN.  

3886 & 3887 Double/King Size Bed

Ref: 00237/3886,3887

Summary of Contents for Salina 3886

Page 1: ...attempting to assemble this product A full checklist of components is given in this leaflet If any components are missing please contact the retailer from whom you purchased this product This product is HEAVY it should be assembled as near as possible to the point of use TAKE CARE WHEN LIFTING to avoid personal injury and or damage to the product This product takes approximately 40 MINUTES to asse...

Page 2: ...ds 8 N M L washers 2 K J spanner 1 I dowels 8 H side rails 2 centre rail 1 slats double bed 32 slats king size bed 34 ends for slats double 64 ends for slats king size 68 threads 8 12mm screws 12 washers 2 central brackets 2 spanner 1 dowels 8 half moon washer 8 nuts and bolts 2 each ...

Page 3: ...de rails C are facing upwards AND you have the Left and Right rails see page 2 on the correct sides locate these side rails onto the protruding threads on the headboard and foot board As you do this slide a half moon washer onto the thread when it comes through into the circular hole in the side of the rail then screw on one of the 8 nuts FINGER TIGHT ONLY Repeat with the other 3 corners Fittings ...

Page 4: ... and the 2 washers and nuts 5 Push a plastic cap onto each end of a slat and with the peg facing downwards push the slat into the pre drilled holes as shown below Repeat for all the slats Once the centre rail is in place tighten all four corners so that they are secured PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Ercol Furniture Ltd Summerleys Road Princes Risborough Buckinghamshire HP27 9...

Reviews: