Ercogener GenPro 25e Page 50 User Manual Download

Page: 50 / 58

EG_GenPro25e_1055_UG_002_UK

Page 50 / 58

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification.

Dct_427_02

5.9 Recommended accessories

The accessories recommended by ERCOGENER for the modem GenPro 25e are described on our website

in the section Products/Accessories. For more information, please contact our sales department.

5.9.1

DIN-rail Kit

– K002

The DIN-rail kit (35mm)

K002

allows a quick assembly/disassembly on a DIN Rail (35mm) OMEGA (IEC/EN

60715 / DIN (35mm) 7.5mm).

5.9.1.1

Assembly of the Kit K002

Step 1

– Insert the kit in the groove situated under the equipment. Pay attention to the way of insertion, the

antenna must be upwards.

Step 2

– Center the kit and tighten the 2 screws.

Figure 29 : DIN rail fixing

– K002

5.9.1.2

Fixing on a DIN rail

To assemble the modem on a DIN Rail (35mm), follow the step 1 (pressure) and the step 2 (rotation) until

hearing a clic.

Figure 30 : DIN rail fixing

To disassemble the modem from the DIN Rail (35mm), follow the step 3 (pressure) and the step 4 (rotation

and removal).

Summary of Contents for GenPro 25e



























































Search results

Summary of Contents for GenPro 25e

Reviews:

Related manuals for GenPro 25e

Brands by name

Popular brands

Ercogener GenPro 25e, User Manual

Search results

Summary of Contents for GenPro 25e

Reviews:

Related manuals for GenPro 25e

Brands by name

Popular brands