EG_GenTrack23e_997_UG_005_UK
Page 26 / 39
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
For more information about AT the commands proposed by the application
EaseTrack
, see the document
"Command List" of the
GenTrack 23e
:
EG_EaseTrack_01_CL_011_UK.pdf
B – If the unit does not contain any application, it will return the du Boot-Loader menu
Menu
by default when there is no application in the unit (example of display):
Bootloader V2.31T2 UK Gentrack v2 (HW02)
Ren v2.21 hw 23
Power supply voltage = 4,15 V
1 - Update application
2 - Erase objects
M - GSM direct access
A - Advanced
P - Power off
E - Exit
For more information about the loading of an application in the GenTrack 23e, see the document "Upgrade
Procedure" (EG_GenTrack23e_997_UP-AE_
xxx
_UK.pdf)
5.2 Buttons of the GenTrack 23e
Important:
The role of the buttons and the Leds entirely depends on the embedded application present in the unit.
In the basic application
EaseTrack
supplied with the GenTrack 23e, the roles are:
5.2.1 Button
This button
is the ON/OFF, it is mainly used to activate and to stop the unit.
5.2.2 Button
This button
is the TELEPHONE button; it is used for example to launch or cancel a vocal call or to launch
a manual position capture.
5.2.3 Red button "SOS"
This button is the emergency button; it can be used to launch or cancel a vocal call or to launch a manual
position capture with a specific alarm login code.
