EG_GenTrack23e_997_UG_005_UK
Page 16 / 39
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
3.2.3.3 Power supply
This power supply 230 Vac / 12 Vdc – 1.2 A (15W) with 4-pin Micro-Fit connector allows to supply the
charger base.
This external power supply is compact and light it is equipped with a European plug and a Micro-Fit
connector to connect directly to the GenTrack 23e base.
3.2.3.4 Fixing clip
This clip allows to fix the GenTrack 23e on a wall support for example.
Diameter of the 2 fixing holes:
Ø 5,8 mm
Pitch between the 2 fixing holes:
40 mm
Description :
Protected against short-circuits.
AC input voltage
100-240 Vac / 0,4 A à 50-60 Hz
DC output voltage
12 Vdc ± 5% 1250 mA
Operating temperature 0 to +40 °C
Relative humidity
30% - 85%RH
Standards
CE – CB - EN60950 (VDE)- T
MARK – UL1310 – UL1950 – CSA
22.2,NO.950
Cable length
2m ±15cm
Output connector
4-pin Micro-Fit connector for
GenTrack 23e
Dimensions
78 x 53 x 34 mm
Weight
140 gr
