Erco&Gener GENPRO 40E R2, User Manual

Page: 49 / 57

EG_GenPro40e-R2_1006_UG_001_UK.doc Page 49 / 57
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCOGENER reserves the right to make any modifications.
Dct_427_02
8.2.2 SIM interface
Table 21 : Characteristics of the power supply voltage of the SIM card
SIM card
3 V or 1.8 V
8.2.3 RF characteristics
8.2.3.1 RF functioning
The RF functioning complies with the recommendation ETSI GSM Phase 2+.
The RF performances for the receiver and the transmitter are described below.
Table 22 : Conducted Rx sensitivity in LTE Band
Band Frequency (MHz)
Conducted Rx Sensitivity (dBm)
(1)
Primary
(Typical)
Secondary
(Typical)
SIMO
(Typical)
SIMO
(Worst Case)
Band 1
Tx: 1920–1980 MHz
-98.7 -97.8 -101.1 -96.3
Rx: 2110-2170 MHz
Band 3
Tx: 1710–1785 MHz
-99.5 -97.3 -101.6 -93.3
Rx: 1805–1880 MHz
Band 7
Tx: 2500–2570 MHz
-98.0
-97.5
-100.5 -94.3
Rx: 2620–2690 MHz
Band 8
Tx: 880–915 MHz
-99.3 -98.5 -102.0 -93.3
Rx: 925–960 MHz
Band 20
Tx: 832–862 MHz
-99.6 -98.4 -102.0 -93.3
Rx: 791–821 MHz
(1)
Sensitivity values scale with bandwidth: x_MHz_Sensitivity = 10_MHz_Sensitivity -
10*log(10MHz/x_MHz)