Wireless Vibration Sensor
Model: WD80
ERA Home Security Ltd
Valiant Way, Wolverhampton,
West Midlands, WV9 5GB.
Email: [email protected]
2. GET TO KNOW
YOUR PRODUCT
1. INTRODUCTION
4. PCB LAYOUT
1. LED Indicator
2. Antenna
Sensitivity Setting:
High/Medium/Low Sensitivity
Mode Setting:
Normal Zone or 24-Hour Zone
Tamper Switch:
If the case is opened in working
state, the tamper switch will send a signal to
trigger the alarm system.
INSTALLATION
MANUAL
Tamper
Switch
Sensitivity
Setting
Mode Setting
3. LED
INDICATION
Flash Once:
Vibration is detected, sending wireless signal
Flash Once Every 2 Seconds:
Low battery indication,
please change batteries.
The Wireless Vibration Sensor adopts the theory of vibration,
touch and motion mode. Once it detects any vibration, it will
automatically send a wireless signal to the control panel to
activate the alarm. It’s widely used for objects with a solid or
thick structure, like a safe. It’s vibrating sensitivity can be
adjusted by three levels to prevent false alarms effectively.
Two AAA 1.5V LR03 batteries are included in the sensor,
which enables 12 months standby.
AAA 1.5V LR03
AAA 1.5V LR03
1
2
3
JP4
1
2
5. SENSITIVITY
SETTINGS
Take off the back case with screwdriver, place the black
jumper cap onto the jumper of required sensitivity level
High Sensitivity
Medium Sensitivity
Low Sensitivity
