EQBPL092
Multi-Directional
LED Sensor Light
USER GUIDE
Page 1: ...EQBPL092 Multi Directional LED Sensor Light USER GUIDE ...
Page 2: ...e since reassembling it could cause it to fail use common sense when deciding where to install the lights Avoid locations likely to be hit by heavy rain Install under an overhang instead Avoid installing the device where it sways with the wind Fix it firmly Avoid placing it where it might fall on people or vehicles Install it in a safe place Avoid installing the device near curtains an air conditi...
Page 3: ...ights on until you manually turn them off or the batteries drain When placing it on the floor open the lights to face the front and with the pedestal part down as shown in the right figure Use it by adhering the supplied metal plate to the magnet of the pedestal If you are placing it on the floor with the lights open you must use the metal plate to prevent the light from tipping over SPECIFICATION...
Page 4: ...ence or from any environmental or natural disasters or from loss or theft This warranty requires proof of sale of the device from EQUIPT or from approved resellers only Devices that are covered will be repaired or replaced at EQUIPT s discretion Devices requiring replacement will be fulfilled with a new or refurbished unit or a similar unit if the original unit is no longer available To take advan...
