WGC1 MKII
USER MANUAL/MANUAL DE USUAIRO
VERSION 1.0
WGC 1 MKII
www.workpro.es
3
1.
INTRODUCTION
WGC1 MKII is a backlit wall controller, which allows to close GPIs of other devices, in order
to send control commands. It can be used with WORK PRO devices and third-party devices.
WGC1 MKII is a device designed primarily for lighting control since the buttons on it are radio
button type, that is, cannot be pressed more than one button at a time.
The WORK PRO devices that incorporate GPIs and can be controlled by the wall-mount
controller are the following:
-
LM GPIO.
-
LM SERIAL.
2.
TECHNICAL DATA
General
Panel
Capacitive
GPOs Configuration
Open Collector. 24 Vdc max. 1 A max.
Connector
Euroblock 9 pin.
Dimensions
85.7 mm x 85.7mm x 15.5mm
Weight
177 g
Main supply
External power supply
5Vdc (Not Included)
Consumption
1.6W
Dimensions