Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: [email protected] Website: www.integrated-circuit.com
ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011
12
1.6 Programmer – Target I/O Signals
The ISPnano features the following programmable signal lines which interface the programmer and
the Target IC(s) to be programmed on the Target System:
•
5 x Programmable
Input / Output
lines
•
1 x Programmable
Output only
line
•
1 x Dedicated
I2C (Two Wire Interface)
port
•
1 x Dedicated
RESET
pin
The diagram below shows the available programmer I/O lines:
Please note:
•
These I/O signals are available on the 16-way IDC Connector labelled
“ISP PORT”
.
29 / 135
29 / 135
