Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: [email protected] Website: www.integrated-circuit.com
ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011
3
1.3 ISPnano MUX2 / MUX4 / MUX8 - Multiplexed Programmers
The
‘ISPnano-MUX’
family of ISP programming systems have been specially developed for medium
to high-volume production programming applications where there is a requirement to program multiple
devices mounted on a
‘PCB Panel’
. The
‘ISPnano-MUX’
programmers use a single integrated
'ISPnano Series 3’
programmer which is then multiplexed sequentially to each UUT (Unit Under
Test) in turn on the PCB panel. This allows the system to sequentially program up to 8 individual
UUTs, one after the other.
Main Features…
•
Available as 2 / 4 or 8 channel multiplexed programming system
•
Supports sequential programming of 2 / 4 or 8 UUTs (depending on programmer model)
•
A single
'ISPnano Series 3'
programmer is multiplexed sequentially to 2 /4 / 8 individual
Target Boards (UUTs)
•
All programming signals are multiplexed to each UUT using high-quality analogue switches
•
All programming signals are fully ESD and over-voltage protected
•
All passive / power signals (Target VCC, Target Vpp and EXT-VCC power signals) are
switched via individual high-quality relays to each UUT
•
Power is always switched off to the target UUT before switching to the next UUT thus
providing very long relay contact life
•
Each programming channel features its own interchangeable 'I/O Connector Module' with
relays and any custom target connectors
•
Status indicators include - current channel being programmed and PASS / BUSY / FAIL
•
Controllable via a PC using the Equinox EDS, ConsoleEDS or ISP-PRO software utilities
•
Channel multiplexer control can be controlled either via the PC or a remote system
ISPnano-MUX Programmer range….
There are currently three programmers in the
‘ISPnano-MUX’
family as detailed in the table below….
Programmer version:
ISPnano-MUX2
ISPnano-MUX4 ISPnano-MUX8
Number of multiplexed
programming channels
2
4
8
No. of programming
channels
(RS485 networked)
up to 64 channels
up to 128
channels
up to 256
channels
Intended use /
application
Programming 2
devices on the
same PCB e.g.
microcont
memory device
Programming
4 x PCBs on a
multi-PCB panel
Programming
8 x PCBs on a
multi-PCB panel
Availability
Q2 2011
Q2 2011
Available now
20 / 135
20 / 135
