Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850, Installer/User Manual

Page: 57 / 100

Chapter 5: CCM Appliance Commands 45
Access right: none needed
Access level: all
Syntax
PORT HISTORY
When you are in port history mode, you may issue the commands listed in Table 3.5 on page 26.
Examples
The following command accesses the serial port’s history mode.
> port history
In history mode, the following command searches the history buffer in the downward direction for
the string “connected to,” ignoring case.
PORT HISTORY > s -d -i “connected to”
Port Logout command
The Port Logout command terminates the CCM appliance session on a specified port.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Syntax
PORT < port > LOGOUT
Port Set command
The Port Set command changes serial port settings in the CCM configuration database. At least one
keyword parameter and value must be specified. Some changes become effective upon the next
connection to the port.
For more information, see
Configuring Serial Port Settings on page 11.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Syntax
PORT [< port >|ALL] SET
[TD=< device >] [NAME=< name >] [BAUD=< baud >] [SIZE=< size >] [PARITY=< parity >]
[STOP=< stopbits >] [FLOW=< signal >] [TIMEOUT=< time-out> ] [SOCKET=< socket >]
[CHAR=^< cli_char >] [TOGGLE=NONE|DTR] [POWER=< signal >]
Table 5.7: Port Logout Command Parameter
Parameter Description
< port > Port number in the range 1-48.