QX1000 Manual II: Administrator's Guide
Administrator’s Menus
QX1000; (SW Version 5.3.x)
118
•
Authentication by Login –
this
selection is used to set the authentication based on the username and password inserted by the user upon
login. The
Username
text field requires the authentication username. Only numeric values are allowed for this field, otherwise the error
message “Incorrect Username - digits allowed only” will appear. The
Password
text field requires the authentication password. Only numeric
values are allowed for this field, otherwise the error message “Incorrect Password - digits allowed only” will appear.
•
Authentication by PIN
- this selection is used to set the authentication based on the PIN inserted by the user upon login. Only digit values are
allowed for this field, otherwise the appropriate error message will be displayed.
The
Expiration Date
and Time
drop down-lists are used to set the date and time when the registration will expire.
The
Expires in
checkbox is used to enable the
Expiration Date and Time
feature.
The
Description
text field requires an optional description about the calling party.
Edit
opens the
Edit Entry
page to modify the local AAA entry.
Delete
removes the selected local AAA entry from the Local AAA Table.
Select all
selects all records of the table.
Inverse selection
inverses the current selection (if no records are selected, clicking on inverse selection will check all records).
Global Speed Dial Directory
The
Global Speed Dial Directory
link leads to the page where
global speed dialing rules may be uploaded in a file. With this
service, you may define multiple speed dial rules, write and save
them in a file and then upload all of them at once.
To compose the configuration file, any text editor can be used
which may produce files compatible to the CSV format: the speed
dial code and destination should be separated by commas. There
should be a line break after each code defined.
The
View/Download Speed Dial Directory
and
Remove Speed
Dial Directory
links appear only if a global speed dial configuration
file is uploaded previously.
Fig. II-202: Global Speed Dial Directory page
The
View/Download Speed Dial Directory
link is used to download the configuration file to the PC and opens the file-chooser window where the
saving location may be specified. The
Remove Speed Dial Directory
link is used to restore the default configuration.
The speed dial configuration file downloaded from the QX1000 is in the CSV format.
To use the global speed dialing rules, user should simply dial the speed dial code assigned to that speed dialing rule. The call will be parsed through
the rules of
table.
To create a new Call Routing rule
1.
Click on the
Call Routing Table
link on the
Call Routing
page.
2.
Press the
Add
button on the
Call Routing
page.
3.
Specify the
Pattern
in the corresponding field.
4.
Select the
Number of Discarded Symbols
and
Prefix
if required.
5.
Select the
Destination
Type
from the drop down list.
6.
Define the
Metric
or leave the default.
7.
Enter a
Description
if needed.
8.
Enable the
Filter on Source / Modify Caller ID
checkbox, if the route functionality should be limited. This is dependent on the source caller
information.
9.
Enable the
Set Date/Time Period(s)
checkbox if a route
should be functional within certain time/date intervals.
10.
Press
Next
.
11.
Select the user or attendant extension from the
Use Extension Settings
drop down list that the call will be placed on.
12.
Specify the
Destination Host
and
Port Number
,
Username
and
Password
if an
IP
or
IP-PSTN
call type has been selected. For the
IP-PSTN
call type, enable
Multiple Logons
if necessary. Enable the
Use RTP Proxy
checkbox if needed.
13.
Choose the Authentication and Accounting method from the
AAA Required
drop down list.
14.
Choose a
Fail Reason
from the corresponding drop down list.
15.
Configure
Transport Protocol for SIP messages
and
SIP Privacy
parameters as needed.
16.
Press the
Next
button.
17.
If the
Filter on Source / Modify Caller ID
checkbox has been previously enabled and the destination type is different from the FXO, fill in the
Source Number Pattern
into the corresponding text field. Choose the needed value from the
Source Type
drop down list, as well as the
Number of Discarded Symbols
and
Prefix
values.
18.
Press the
Next
button.
19.
If
IP
has been selected on the previous step in the
Source Type
drop down list, then
Source Host
should be inserted in the current page. If
FXO
or
ISDN
has been selected in the
Source Type
drop down list, then the ISDN trunk or the FXO line number should be selected here.
20.
If
the
Set Date/Time Period(s)
checkbox has been selected on the first page, pressing
Next
will open the
Date/Time Rules
page where route
validity should be defined.
